burkert 0255 high performance solenoid valve plunger principle Proudly direct acting solenoid valve pneumatic angle valve, stainless steel metal body seal and wear seat. Also provides links, high pressure and high temperature type. Pressure range :0-16bar max medium temperature:. -40 To +180 ℃ ambient temperature:. Max +55 ℃ Body material: brass or stainless steel Sealing material: PTFE Material :: epoxy coil power consumption: DC: 16W , AC :35-40VA (pull) burkert meter, 16/10VA (keeping) Burkert 8032 Turbine Flow Switch 8032-line flow switch with on / off the display DN6-DN65 8032-line flow switch can be used to clean and liquids , neutral liquids or corrosive liquids, including one with built-in turbine connectors and an electronic module, electronic module and connectors easily connected together by a bayonet. Can be used as a transistor or relay contacts, you can use three operating buttons on the monitor set switching point. 8032-line flow switch for a variety of applications for liquid flow switch control. Field adjustable switch point display (transistor or relay) hysteresis and time delay is adjustable. Technical parameters Measuring range :0.5-1200L / MIN flow rate :0.3-10m / s Accuracy: teach-in calibration ≤ ± 1% of full scale standard K-factor (via remote transmitter) Correction ≤ ± (1% of full scale + 3% of reading) medium temperature: PVC / PP fittings 0-50 ° C/0-80 ° C stainless steel, brass or PVDF fittings -15 ° C - 100 ° C Ambient temperature: 0 ° C - +60 ° C (working and storage) Maximum media pressure: PN10 (plastic connector) PN16 (metal fittings) medium viscosity: Maximum 300cst Sensor Accessories / Turbo PVC, PP, PVDF, brass, stainless steel / PVDF shaft and bearing / seal Ceramic / FKM bore: DN06-DN65 Power supply :12-36VDC filtered and rectified current consumption: ≤ 80ma (no load) [Proudly], burkert meter, provided by Kilkee Kilkee. Welcome to consult Qingdao Kilkee Fluid Control Systems Limited (www.koercl.cn), be sure to specify when contact is through the "Business Alliance Member" see, thank you! Contact: Wang